1. Industrial Pharmacist
Responsibilities:
• Involved in the R&D, testing, manufacturing, analysis, and marketing of Esco’s product
• Maintain and validate existing documentations (manuals, reference guides, user guides)
• Manage small projects
• Review progress of projects and initiate appropriate actions to achieve project objectives
• Write project report
• Responsible for performing pharmaceutical testing on raw materials and intermediates
Requirements:
• Bachelor degree in Pharmacy
• Prior experience working in a pharmaceutical lab will be an added advantage
• Knowledge in laboratory and industrial procedure is a plus
• Good command in written and spoken English
• Strong analytical skills, attention to details, and meticulous
• Able to work in Lobam, Bintan, Kepulauan Riau
2. Electrical Projects Engineer (PLC / Automation)
Responsibilities:
• Concept-to-completion development of electrical, automation, PLC-based systems.
• Includes preparing costings, designing test rigs, compiling hardware design specifications, electrical
systems design, sourcing/integrating off-the-shelf components
(motors/drives/sensors/valves/PLCs/HMIs), testing/validation, documentation/training/handover.
• Seasoned electrical systems engineer able to deliver quality projects/designs on time and within cost
budget.
• Independent, able to manage own project plan/budget/schedule.
• Team player, able to integrate with a cross-functional team, to deliver a validated, documented,
quality electro-mechanical system on time and within budget.
Requirements:
• Degree in Electrical or Instrumentation Engineering.
• 3+ years of experience in designing PLC-based machine/electrical control systems.
• Knowledge of PLC-programming (Allen Bradley, Siemens, Mitsubishi, etc.) a must.
• Project management experience a must.
• Good English communication skills.
• Strong in Math and design conceptualization.
• Prepared to go the extra mile.
• Able to work in Lobam, Bintan, Kepulauan Riau
3. Embedded Hardware Engineer
Responsibilities:
• Utilizing strong intra-personal, communication and technical skills, performs PCB and system level
Embedded Hardware design in the development of new products.
• Performs detailed board-level power, analog, and some digital design.
• Develops detailed, complete, and accurate system, subsystem, and component level hardware
specifications.
• Tests hardware to rigorous and complete test plans, to ensure the highest level of product reliability.
• Executes projects both as a member of a larger project team as well for stand-alone hardware
projects. May lead small team of Electronics Engineers (on and off shore) or perform Electronics
Engineering tasks as an individual contributor.
• Working alongside other Engineering and cross-functional team members, identifies and implements
projects for design optimization which include quality improvements, vitality through minor upgrades,
design for assembly, cost reduction, and design for sustainability.
• Executes projects within performance, schedule, and budget constraints through all phases of
product development, from planning stages through design, prototyping, testing, and release to
production. Ensures design is thoroughly documented and meets all requirements.
• Conducts or updates Failure Modes and Effects Analysis (FMEA) on designs. Conducts Root Cause
Analysis (RCA) on existing product failures and develop solutions for same and guides design
choices to maximize reliability.
• Working with legal counsel, prepares information for patent applications as necessary.
• With guidance from the Regulatory Affairs team, acquires required agency approvals such as, U.L.,
C.S.A. and CE and other product certifications.
Requirements:
• Bachelors in Electrical or Computer Engineering, or equivalent degree
• 3 to 8+ years experience in the design of analog and power board-level circuit design.
• Ability to lead small team of Engineers as a project leader.
• Experience with board-level analog and power design. Excellent understanding of the following: DCDC
converter circuits, amplifier circuits, temperature measurement circuits and technologies, motor
control circuits utilizing relays and triacs, comparators, transformers, Analog to digital conversion and
vice-versa. Low noise design experience preferred.
• Analog and digital circuit simulation in a software package such as Mentor Graphics Hyperlynx
Analog simulation or Linear Technology LTspice
• Proficiency with schematic capture, electrical design simulation, design for electrical thermal
performance, design for EMI/EMC, PWB design and layout, design for low power operation.
• Ability to review schematics and PCB layouts to ensure optimal analog circuit performance.
• Proficiency in the use of soldering equipment, oscilloscopes, meters, and data loggers.
• Experience implementing motors, compressors, fans, relays, switches, harness design, and related
components.
• Must be a self motivated, innovative, results oriented team player.
• Must have strong written and verbal communications skills
• Experience working with and/or coordinating activities of offshore design service providers is a plus.
• Design for Six Sigma (DFSS) skills or other statistical tool usage is a strong plus.
• Experience utilizing a rigorous and structured design process to reduce design cycle time and
improve design quality a strong plus.
• Experience with the design of temperature control systems is a plus.
• Experience creating designs to be produced in multiple global manufacturing sites is a plus.
• MS Office fluency is a plus (MS Word, Excel, PowerPoint, Outlook.)
• Some travel may be required
• Able to work in Lobam, Bintan, Kepulauan Riau
4. Embedded Software Engineer
Responsibilities:
• Electronics design and product development, from conceptualization, initial design, prototyping, to
implementation
Embedded system hardware and firmware design
Digital and analog electronic circuit design
Power electronics
PC software for monitoring and control applications
• Carry out performance optimization, cost analysis, prototyping, until production
• Component selection, testing, and evaluation
• Work closely with customers and internal cross-functional teams to ensure products meet all
specifications
• Hardware, firmware, and software documentation (design documents, flowcharts, operation manuals,
test procedures, etc.)
• Troubleshooting, analysis, and debugging of firmware and hardware for existing products
• Writing of technical specifications for submission to subcontractors for circuit design, firmware coding,
contract manufacturing for certain products
Requirements:
• Bachelor degree in Computer Engineering / Electronics, with strong background in embedded system design
• Relevant work experience of 2-3 years in a product development / R&D environment
• Strong skills in C programming language
• Experience with any of the following will be a plus: DAQ systems (LabView), product safety standards
(UL, TUV), EMC testing and countermeasures, PC software development
• Excellent technical writing, documentation, and communication skills
• Good command in written and spoken English
• Innovative, resourceful, and able to work independently or in a team
• Able to work in Lobam, Bintan, Kepulauan Riau
5. New Product Development Manager (NPI / NPD)
Responsibilities:
• Coordinate activities with suppliers, product marketing, quality, engineering and manufacturing to
successfully meet assigned project objectives.
• Lead cross functional program team/s responsible for development of new products
• Provide day-to-day coordination, monitor product performance and coordinate resolution of issues.
• Ensure that product requirements, project and business goals are met.
• Assess and manage program risks and budget as well as define and ensure adherence to project
schedule. Work with Quality, Engineering, Sourcing, Marketing and customers to define product
specifications and functions.
• Create and manage product development schedules, issues, and process requirements.
• Coordinate and conduct customer input programs, customer needs analysis, customer profile
development and customer summaries.
• Work closely with outside development teams to resolve technical problems and devise new
approaches to problems encountered.
• Manage and direct and Development Department, coach engineers, manage performance, develop
and implement standard operating procedures for department.
• Ensure clear communication channels within Development Team and cross-functional departments.
Requirements:
• Bachelor or Master degree in Mechanical Engineering / other Engineering
• 5-10 years experience in new product development, 2+ years of supervisor experience.
• Experience in the engineering disciplines of mechanical engineering, system engineering, software
engineering and electrical engineering.
• Must be familiar with functions of Manufacturing, Product Management, Marketing, Quality
Assurance, and Procurement.
• Good knowledge in product design and verification techniques
• Experience gathering customer input and developing needs analysis.
• Hands on approach and ability to work with CAD such as CATIA V5 , Pro-Eng or other.
• Excellent verbal and written English in a cross-cultural environment.
• Detail oriented with excellent organizational skills.
• A team player and able to build internal and external relationship
• Proven leadership and managerial skills
• Able to work in Lobam, Bintan, Kepulauan Riau
6. Production / Manufacturing Engineer (Sheet Metal Fabrication)
Responsibilities:
• Plan and coordinate production procedures and processes in a high- mix/low-volume sheet metal
fabrication plant environment
• Regulates and coordinates functions of Production Office and Shop Floor
• Develop and implement efficient production/Lean Manufacturing methods to improve Quality,
Productivity, Throughput/Ouput, Safety, Timeliness and other Key Performance Indicators
(KPIs)/Deliverables
• Manage a 10,000 sq. ft. state-of-the-art sheet metal fabrication shop including shear, punch presses,
laser, press brakes (bending machines), roller, and other supporting equipment; with a work force of ± 50 operators
• Lead, mentor and develop a team of shop floor operators, supervisors and leaders, to enable them to
perform more effectively in their respective job functions
• Develop, implement and sustain preventive maintenance programs for all sheet metal processing
equipment, to maximize machine uptime and quality
• Manage punch and press brake (bending machine) tooling from acquisition, utilization, maintenance
to retirement
• Work cross functionally (Purchasing, Materials, Planning, Management, Human Resources, Quality,
Engineering, etc.) and across departments (Welding, Powder Coating, Assembly, Warehouse, etc.) to
accomplish all Department and Company/Business Goals
• Other responsibilities and projects as assigned
• Key Performance Indicators:
1) Quality
2) Cost
3) Productivity
4) Capacity Utilization
5) Machine Downtime/Utilization
6) Timeliness
7) Safety
Requirements:
• Bachelor degree in Mechanical Engineering
• At least 5 years of production experience with 2+ years supervisory experience
• Prior experience with sheet metal fabrication
• High degree of mechanical aptitude
• Production/Process/Operations-oriented, systematic, energetic
• Proven leadership and managerial skills
• Experience with Lean Manufacturing/Toyota Production System a strong plus
• Willing to work long hours if needed
• Able to work in a cross functional team environment
• Able to work under pressure and tight deadlines
• Excellent communication in English (written and spoken) is a must
• Able to work in Lobam, Bintan, Kepulauan Riau
7. Senior Quality Control Engineer (SMT/PCBA/Electronics)
Responsibilities:
• Problem discovery from ESCO IQC, In-Process QC, Final QA and Technical Service Feedback
• Initiates, plans and executes proactive technical audits for ESCO critical electronics vendors
• Further problem discovery during vendor factory technical audits
• Carry out root cause investigations with vendor
• Work with vendor to develop corrective action plans
• Follow up on implementation
• Utilize findings from the above processes as input into ESCO IQC processes
• Recommend, monitor and trend quality metrics from Vendor QC, ESCO IQC, In-Process QC, Final QC, Technical Service to assess actual improvements.
• Develop, recommend and implement strategies to continuously improve quality / reduce cost / reduce
risk, working cross-functionally with all stakeholders. This may include input into component selection, reliability engineering (relates to HALT testing for ESCO new designed PCBAs), recommending sourcing an alternate vendors, and others.
• As required, train ESCO personnel across functions so they may function more effectively in their roles to achieve the above objectives.
Requirements:
• Degree in Mechanical / Manufacturing Engineering
• At least 3 years QA/QC experience working in manufacturing industry
• Familiar with Toyota Production System concepts
• Demonstrated Quality Control experience with knowledge of ISO 9001, SPC, and other QC tools
• Candidate must have SMT experience in an electronics/PCBA manufacturing environment
• Experience with IPC standards, AQL tables, PCBA DFM
• Able to develop, implement, and continuously improve/sustain IQC and other procedures/processes
• Experience with vendor/supplier technical audits
• Experience in capital equipment manufacturing environment will be an advantage
• Technical and detail oriented
• Proven leadership and managerial skills
• Overseas work experience will be an advantage
• Excellent communication skills in English in a cross-cultural environment
• A team player and able to build internal and external relationship
• Able to work in Lobam, Bintan, Kepulauan Riau
8. Technical Manager
Responsibilities:
1. Project Management for New Product Development (NPD)
- Mechanical / Systems Design
- Certification/Regulatory Compliance
- Accountable for Quality/Reliability/Results/Certification Achieved On Time/Budget/Schedule
2. Lead Engineer
- Regulatory Compliance
- Publication/Sign-Off of Technical Specifications
- Participation in Industry Associations As Required/Assigned
- Other Technical Duties As Assigned
- Be Trained, Gain and Maintain Industry Accreditation Status
- Development and Implementation of Test Protocols and Procedures
3. Technical Service
- 2nd Line of Support for Complex Cases
- Provide Input into Serviceability
- Training Support
- Development and Continuous Improvement of Training Materials, Complex Service Bulletins
- Review Manuals
4. Quality/Change Management/Continuous Improvement
- Form and Lead Cross Functional Teams
5. Working Cross Functionally/Across Disciplines to Facilitate the Above
- Always Strive to Improve Quality
- Always Strive to Build/Design In Quality
- Facilitate Culture Change on the Shop Floor
- Always Strive to Improve the Products/Innovation
- Work Cross Functionally with Product Management, Business Development, Etc.
- Work Cross Functionality with Sales/Service Engineers Located at Esco Subsidiaries Internationally
6. Growth Roles, Project Management for:
- Embedded Systems, Hardware and Software
- Electrical
- Manufacturing Engineering
- Electrical Regulatory Compliance
- Greater Accountability for Product Cost
7. Other Responsibilities as Assigned
Requirements:
• Bachelor degree in Mechanical or Electrical Engineering
• At least 5 years New Product Development (NPD) Project Management experience with 2+ years
supervisory experience
• Able to work cross functionally and across disciplines
• Excellent verbal and written English in a cross-cultural environment
• Detail oriented with excellent organizational skills.
• Able to manage a team to be accountable for Outcome/Quality/Cost/Schedule
• Proven leadership and managerial skills
• Able to work in Lobam, Bintan, Kepulauan Riau
9. Technical Service Engineer
Responsibilities:
• Manage the productivity of independent field service technicians by ensuring proper training in the
skills and knowledge to perform field diagnostics
• Interact with field personnel in the repair of Esco Products
• Investigate and report field product performance issues
• Increase product reliability through the creation of corrective action plans involving cross-functional
teams from Quality, Engineering, Purchasing, Product Management and the field organization
• Develop and distribute product information and service bulletins to the field
• Ensure that the organization follows all the guidelines and policies regarding service and installation
guidelines
• Assign internal service personnel to perform field response on critical installations and modify
department priorities when changes are necessary
Requirements:
• Bachelor in Electrical Engineering or related fields
• At least 5 years experience with 2+ years supervisory experience
• Previous experience managing field service personnel in a manufacturing environment of installed
products
• Demonstrated organization and interpersonal skills, including the ability to interface with all levels of
management and service providers
• Demonstrated customer-oriented attitude and successful customer service track record
• Able to Work Cross Functionally and Across Disciplines
• Ability to process information and analyze to make appropriate recommendations
• Excellent spoken and written English
• Able to work in Lobam, Bintan, Kepulauan Riau
10. Welding Engineer (ASME/PED Pressure Vessel Products)
Responsibilities:
• Interpretation of technical requirements of fabrication codes, standards, and customer specifications.
• Development of appropriate welding procedures, welder training, and monitoring of shop weld
application.
Requirements:
• Bachelors degree in Engineering or a Diploma with solid experience
• 5+ years of experience in welding engineering assignments related to the manufacture and welding
of pressure vessel ASME code/PED products
• Strong background in Robotics would be a PLUS
Supervisory experience and automatic welding procedures is a PLUS
• Excellent written and spoken English
• Able to work in a cross functional team environment
• Able to work under pressure and tight deadlines
• Able to work in Lobam, Bintan, Kepulauan Riau
What Is Unique About This Position?
• Be part of a greenfield project to manufacture biomedical autoclaves at the Esco Bintan, Indonesia
facility (first such manufacturing facility in Southeast Asia)
• New position created for an experienced candidate with immediate assumption of responsibility and
allocation of resources
• Develop from scratch, implement and “own” a pressure vessel manufacturing cell within the Esco
manufacturing facility
• A unique opportunity to implement new pressure vessel fabrication procedures, practices and
technologies, which would be more difficult in an established environment
• Lead the Esco pressure vessel manufacturing cell and Manufacturing Engineering function
• Get things done quickly and advance your Career - this position reports directly to Senior Management
11. Mechanical Design Engineer
Responsibilities:
• Deliver innovative mechanical designs, fabrication, and specification for production
• Create piece part and assembly level CAD 3D models, drawings and design specifications. Apply Six
Sigma design principles to ensure robustness and Design for Manufacturability
• Develop specific mechanical components / mechanisms to be integrated with final product
• Plan, schedule and manage mechanical project deliverables in a coordinated, multi-disciplinary
project team environment. Responsible for all mechanical aspects of each project from design
through to release to tooling and manufacturing
• Ensure the integrity of all mechanical design outputs, including documentation, revision control,
product regulatory testing and approvals, intellectual property opportunities, etc
• Coordinate with other functions outside of R&D including production, product management, outside
agencies, vendors, etc
• Perform or direct tasks in support of new product development efforts such as drafting, literature,
research, prototype fabrication, experiments, testing, etc. Assist in budget and resource forecasting
for departmental activities and technical projects
• Carry out performance optimization, cost analyses, prototyping, and design support for production
Requirements:
• Diploma / Bachelor degree in Mechanical Engineering, preferably specialized in Design
• At least 2-3 years of hands-on experience designing mechanical components and assemblies.
• Good knowledge with 2D/3D CAD/ CAM software, preferably Vertex and Solid work, ProEng, and AutoCAD
• Must be able to create parts, multi-component assemblies and dimensioned drawings to company
standards. Strong ability with geometric and dimensional tolerance analysis, tolerance stack-up and tolerance optimization.
• Strong background in materials, production fabrication techniques, computational fluid dynamics
(CFD), and processes including sheet metal processing, other background in injection molding, diecasting
and machining will be an advantage.
• Must have a strong interest in R&D
• Excellent written and verbal communication skills and demonstrated ability in documenting technical
work to make the complex simple.
• Emphasis will be placed on candidates who have demonstrated success in taking similar products
through the complete design cycle
• Good command of spoken and written English
• Fresh graduate are welcomed to apply
• Able to work in Lobam, Bintan, Kepulauan Riau
12. Senior Mechanical Design / Systems Engineer (NPI/NPD)
Responsibilities:
• Concept-to-completion development of electro-mechanical equipment/machinery products.
• Includes preparing costings, compiling system/performance design specifications, mechanical design
of parts, subassemblies and top-level assembly, sourcing/integrating off-the-shelf/custom
components/parts (blowers/motors/hardware/controls/filters/molded/extruded parts), prototyping,
testing/validation, documentation/training/handover.
• Participate in / follow the prototyping process, from sheet metal fabrication, to assembly and testing,
in order to identify areas for improvement, to strive to Design for Manufacturing / Assembly / Service.
• Vendor/supplier liaison for sourcing, vendor selection, qualification, first article inspection, and
continuous improvement, especially for custom molded/extruded parts.
• Clearly organize/structure the Product Structure Definition, to enable part/sub-assembly re-use,
design platform modularity, and project risk minimization.
• Development, maintenance and continuous improvement of Manufacturing Work Instructions and Process Sheets including Bending/Forming Drawings, Welding Instructions, Assembly Work
Instructions, Test Procedures and others.
• Drive from a “Systems-Perspective” the development of User/Operator and Service Manuals,
collating/compiling information from other functional Engineering specialities (Electrical, Embedded
Hardware, Software, Regulatory Approvals, etc.)
• New Product Introduction support including Shop Floor Training, Pilot Run, First Article Burn-
In/Inspection, Quarantine (As-Needed), Safe Launch.
• Technology transfer support for transfer of technology/knowledge from overseas facilities from
design, functional specifications, manufacturing line set up, processes, tooling, fixtures and other
related areas.
• Seasoned mechanical design engineer able to deliver quality projects/designs on time and within cost
budget.
• Independent, able to manage own project plan/budget/schedule.
• Team player, able to integrate with a cross-functional team (Electrical Engineering, Embedded
Systems Hardware and Software Engineering, Manufacturing Engineering, Regulatory Approvals,
Purchasing/Procurement, Manufacturing/Production, Quality Control, Product Management,
Technical Service, etc.), to deliver a validated, documented, quality electro-mechanical system on time and within budget.
• Review, approve and implement Engineering Change requests/Notifications/Orders.
Requirements:
• Degree in Mechanical Engineering, related field, or relevant industry experience.
• Some Systems Engineering experience.
• 3+ years of experience in designing equipment/machinery products.
• Sheet metal design experiences a plus.
• Familiar with New Product Development / NPD / NPI processes.
• Knowledge of 3D design software (SolidWorks, Pro/Engineer or SolidEdge) a must.
• Experience with PLM (Product Lifecycle Management) software such as Dassault Systems
ENOVIA/MatrixOne, PTC WindChill, Siemens TeamCenter would be a plus.
• Project management experience a must.
• Prepared to go the extra mile.
• Demonstrated organization skills to successfully meet and / or exceed product quality and cost
requirements.
• Effective verbal & written English communication skills across all levels and function within a multidisciplinary
product development environment.
• Able to work in Lobam, Bintan, Kepulauan Riau
13. Senior Refrigeration Design Engineer
Responsibilities:
• Analyze, design, develop, and enhance thermal control systems
• Conduct thermal analysis, mechanical calculations and network with developers/ engineers
• Report estimation of project cost
• Perform prototype design, evaluation, testing and integration
• Prepare and update results documentation, engineering drawings and operation procedures
• Assist and support manufacturing and production issues as well as provide consultation/improvement plan
• Perform or direct tasks in support of new product development efforts such as drafting, literature, research, prototype fabrication, experiments, testing, etc. Assist in budget and resource forecasting for departmental activities and technical projects
Requirements:
• Master in mechanical engineering specialized in Thermodynamics
• At least 3-5 years working experience in related fields
• Expert knowledge on Heat Transfer, Fluids Dynamic, Finite Element Analysis, Cooling and Ventilation
analysis, Pressure relief analysis, and Compressor selection preferred
• Knowledge of refrigeration theories and practices
• Familiar with actual production methods/ brazing methodology
• Excellent in written and spoken English
• Able to work cross culture, cross functionally, and across disciplines
• Knowledge of 3D design software (SolidWorks, Pro/Engineer or SolidEdge) a must.
• Must have a strong interest in R&D
• Able to work in Lobam, Bintan, Kepulauan Riau
14. Technical Writer
Responsibilities:
• Create/Update documentations to take into account new product versions
• Maintain and validate existing documentations (manuals, reference guides, user guides)
• Learn products well and translate technical details of products into simple, easy to understand
product literature for delivery to customers.
• Prepare brochures, user manuals, documentation; sell sheet, and press/product releases.
• Design and create product literature, edit, and layout; insert copy and standardize literature according
to company’s corporate image.
• Prepare rough drafts for review by staff or distributors before closing out the literature production process by sending it for print
Requirements:
• Degree in Engineering, Biology, or Chemistry preferred
• Excellent written and spoken English
• Experienced in writing engineering documents, e.g. User Requirements, Engineering Specifications,
Factory and Site Acceptance Test Protocols, Product Test Protocols, etc
• Experienced in writing validation documents e.g. Validation Plans, Risk Assessments.
• Strong knowledge in Microsoft Office, Adobe InDesign, Visio, etc
• Creative, fast learner, observant and resourceful
• Knowledge in laboratory and industrial procedure is a plus
• Able to work in Lobam, Bintan, Kepulauan Riau
15. Manufacturing Engineer
Responsibilities:
• Recommend and apply engineering methods and procedures to improve product quality to keep plant
operational, eliminate waste, reduce cycle time, and improve operating performance.
• Provide technical support to manufacturing departments through the collection and processing of
information relating to assigned projects, followed by evaluation of all information and alternatives
resulting in recommendations for a course of action to management, and subsequent implementation.
• Recommend and implement Manufacturing processes and procedures, tools and equipment, layouts
and methods to improve:
Flexibility
Energy Utilization
Set-up Time
Value Added Operations
Mfg. Cycle Time
Material Utilization
Quality
FDA GMP ISO-9000
Third Party Certification Program
Safety
Customer Satisfaction/Internal and External
• Develop machine/manpower requirements and utilization for long-range business plans.
• Review and recommend manpower utilization.
• Prepare appropriate manufacturing policies and procedures.
• Resolve production floor technical issues to achieve throughput and quality goals.
• Actively participate in new product development to optimize production productivity.
• Review and approve Engineering Change Requests (ECR’s).
• Work on Continuous Quality Improvement.
Requirements:
• Must have working knowledge of hard goods manufacturing processes and machinery, along with a
good analytical ability to analyze present procedures and make recommendations for improvement to
management.
• Must be able to resolve complex problems.
• Bachelors in related engineering field or equivalent work experience.
• Minimum two years working experience.
• Working knowledge of various sheet metal fabrication and welding procedures and practices would
be a plus.
• Must have excellent communication and interpersonal skills and be able to demonstrate same across
department boundaries and with all levels of management.
• Able to work in Lobam, Bintan, Kepulauan Riau
16. Human Resources Officer (HR)
Responsibilities:
• Assist the HR team in delivering full spectrum of Human Resources services
• Handle HR administration work, provide support and advise to employees as required
• Responsible for updating and maintaining the Employee HRM database and confidential personal files
• Plan, develop, manage and administer training programs for employees
• Assist in orientation and induction program for new employees
• Assist in payroll processes
Requirements:
• At least 1 year experience in HR, preferably in training
• Familiar with full spectrum of HR (training, recruitment, manpower regulations, etc)
• Good command in written and spoken English
• IT savvy and proficient in Microsoft Office applications
• Meticulous, organized with an eye for details
• Strong communication and interpersonal skills
• Pleasant and approachable personality with a positive learning attitude
• Able to work under pressure and tight deadlines
• Able to work in Lobam, Bintan, Kepulauan Riau
17. Accountant (Payroll)
Responsibilities:
• Handle full set of accounts; co-ordinate and ensure monthly closing with stipulated deadlines
• Manage and ensure compliance with all accounting, tax, statutory, legislative requirements and group policies
• Responsible for monthly payroll calculation including PPh 21, overtime, absenteeism, bonus, etc
• Responsible for updating employee status and handling claims related to Jamsostek
• Responsible for handling petty cash
• Any other duties assigned
Requirements:
• Bachelor degree in Accounting
• At least 2 years working experience in related fields
• Good knowledge in overall accounting system
• Able to work under pressure and tight deadlines
• Meticulous and attention to details
• Excellent numerical skill
• Good command in spoken and written English. Ability in Mandarin is a plus
• Computer literate, especially Excel
• Able to work in Lobam, Bintan, Kepulauan Riau
Interested candidates are invited to write in with a full resume, stating present/expected salaries, and enclosing a recent photograph to jobs@escoglobal.com
Selengkapnya......Responsibilities:
• Involved in the R&D, testing, manufacturing, analysis, and marketing of Esco’s product
• Maintain and validate existing documentations (manuals, reference guides, user guides)
• Manage small projects
• Review progress of projects and initiate appropriate actions to achieve project objectives
• Write project report
• Responsible for performing pharmaceutical testing on raw materials and intermediates
Requirements:
• Bachelor degree in Pharmacy
• Prior experience working in a pharmaceutical lab will be an added advantage
• Knowledge in laboratory and industrial procedure is a plus
• Good command in written and spoken English
• Strong analytical skills, attention to details, and meticulous
• Able to work in Lobam, Bintan, Kepulauan Riau
2. Electrical Projects Engineer (PLC / Automation)
Responsibilities:
• Concept-to-completion development of electrical, automation, PLC-based systems.
• Includes preparing costings, designing test rigs, compiling hardware design specifications, electrical
systems design, sourcing/integrating off-the-shelf components
(motors/drives/sensors/valves/PLCs/HMIs), testing/validation, documentation/training/handover.
• Seasoned electrical systems engineer able to deliver quality projects/designs on time and within cost
budget.
• Independent, able to manage own project plan/budget/schedule.
• Team player, able to integrate with a cross-functional team, to deliver a validated, documented,
quality electro-mechanical system on time and within budget.
Requirements:
• Degree in Electrical or Instrumentation Engineering.
• 3+ years of experience in designing PLC-based machine/electrical control systems.
• Knowledge of PLC-programming (Allen Bradley, Siemens, Mitsubishi, etc.) a must.
• Project management experience a must.
• Good English communication skills.
• Strong in Math and design conceptualization.
• Prepared to go the extra mile.
• Able to work in Lobam, Bintan, Kepulauan Riau
3. Embedded Hardware Engineer
Responsibilities:
• Utilizing strong intra-personal, communication and technical skills, performs PCB and system level
Embedded Hardware design in the development of new products.
• Performs detailed board-level power, analog, and some digital design.
• Develops detailed, complete, and accurate system, subsystem, and component level hardware
specifications.
• Tests hardware to rigorous and complete test plans, to ensure the highest level of product reliability.
• Executes projects both as a member of a larger project team as well for stand-alone hardware
projects. May lead small team of Electronics Engineers (on and off shore) or perform Electronics
Engineering tasks as an individual contributor.
• Working alongside other Engineering and cross-functional team members, identifies and implements
projects for design optimization which include quality improvements, vitality through minor upgrades,
design for assembly, cost reduction, and design for sustainability.
• Executes projects within performance, schedule, and budget constraints through all phases of
product development, from planning stages through design, prototyping, testing, and release to
production. Ensures design is thoroughly documented and meets all requirements.
• Conducts or updates Failure Modes and Effects Analysis (FMEA) on designs. Conducts Root Cause
Analysis (RCA) on existing product failures and develop solutions for same and guides design
choices to maximize reliability.
• Working with legal counsel, prepares information for patent applications as necessary.
• With guidance from the Regulatory Affairs team, acquires required agency approvals such as, U.L.,
C.S.A. and CE and other product certifications.
Requirements:
• Bachelors in Electrical or Computer Engineering, or equivalent degree
• 3 to 8+ years experience in the design of analog and power board-level circuit design.
• Ability to lead small team of Engineers as a project leader.
• Experience with board-level analog and power design. Excellent understanding of the following: DCDC
converter circuits, amplifier circuits, temperature measurement circuits and technologies, motor
control circuits utilizing relays and triacs, comparators, transformers, Analog to digital conversion and
vice-versa. Low noise design experience preferred.
• Analog and digital circuit simulation in a software package such as Mentor Graphics Hyperlynx
Analog simulation or Linear Technology LTspice
• Proficiency with schematic capture, electrical design simulation, design for electrical thermal
performance, design for EMI/EMC, PWB design and layout, design for low power operation.
• Ability to review schematics and PCB layouts to ensure optimal analog circuit performance.
• Proficiency in the use of soldering equipment, oscilloscopes, meters, and data loggers.
• Experience implementing motors, compressors, fans, relays, switches, harness design, and related
components.
• Must be a self motivated, innovative, results oriented team player.
• Must have strong written and verbal communications skills
• Experience working with and/or coordinating activities of offshore design service providers is a plus.
• Design for Six Sigma (DFSS) skills or other statistical tool usage is a strong plus.
• Experience utilizing a rigorous and structured design process to reduce design cycle time and
improve design quality a strong plus.
• Experience with the design of temperature control systems is a plus.
• Experience creating designs to be produced in multiple global manufacturing sites is a plus.
• MS Office fluency is a plus (MS Word, Excel, PowerPoint, Outlook.)
• Some travel may be required
• Able to work in Lobam, Bintan, Kepulauan Riau
4. Embedded Software Engineer
Responsibilities:
• Electronics design and product development, from conceptualization, initial design, prototyping, to
implementation
Embedded system hardware and firmware design
Digital and analog electronic circuit design
Power electronics
PC software for monitoring and control applications
• Carry out performance optimization, cost analysis, prototyping, until production
• Component selection, testing, and evaluation
• Work closely with customers and internal cross-functional teams to ensure products meet all
specifications
• Hardware, firmware, and software documentation (design documents, flowcharts, operation manuals,
test procedures, etc.)
• Troubleshooting, analysis, and debugging of firmware and hardware for existing products
• Writing of technical specifications for submission to subcontractors for circuit design, firmware coding,
contract manufacturing for certain products
Requirements:
• Bachelor degree in Computer Engineering / Electronics, with strong background in embedded system design
• Relevant work experience of 2-3 years in a product development / R&D environment
• Strong skills in C programming language
• Experience with any of the following will be a plus: DAQ systems (LabView), product safety standards
(UL, TUV), EMC testing and countermeasures, PC software development
• Excellent technical writing, documentation, and communication skills
• Good command in written and spoken English
• Innovative, resourceful, and able to work independently or in a team
• Able to work in Lobam, Bintan, Kepulauan Riau
5. New Product Development Manager (NPI / NPD)
Responsibilities:
• Coordinate activities with suppliers, product marketing, quality, engineering and manufacturing to
successfully meet assigned project objectives.
• Lead cross functional program team/s responsible for development of new products
• Provide day-to-day coordination, monitor product performance and coordinate resolution of issues.
• Ensure that product requirements, project and business goals are met.
• Assess and manage program risks and budget as well as define and ensure adherence to project
schedule. Work with Quality, Engineering, Sourcing, Marketing and customers to define product
specifications and functions.
• Create and manage product development schedules, issues, and process requirements.
• Coordinate and conduct customer input programs, customer needs analysis, customer profile
development and customer summaries.
• Work closely with outside development teams to resolve technical problems and devise new
approaches to problems encountered.
• Manage and direct and Development Department, coach engineers, manage performance, develop
and implement standard operating procedures for department.
• Ensure clear communication channels within Development Team and cross-functional departments.
Requirements:
• Bachelor or Master degree in Mechanical Engineering / other Engineering
• 5-10 years experience in new product development, 2+ years of supervisor experience.
• Experience in the engineering disciplines of mechanical engineering, system engineering, software
engineering and electrical engineering.
• Must be familiar with functions of Manufacturing, Product Management, Marketing, Quality
Assurance, and Procurement.
• Good knowledge in product design and verification techniques
• Experience gathering customer input and developing needs analysis.
• Hands on approach and ability to work with CAD such as CATIA V5 , Pro-Eng or other.
• Excellent verbal and written English in a cross-cultural environment.
• Detail oriented with excellent organizational skills.
• A team player and able to build internal and external relationship
• Proven leadership and managerial skills
• Able to work in Lobam, Bintan, Kepulauan Riau
6. Production / Manufacturing Engineer (Sheet Metal Fabrication)
Responsibilities:
• Plan and coordinate production procedures and processes in a high- mix/low-volume sheet metal
fabrication plant environment
• Regulates and coordinates functions of Production Office and Shop Floor
• Develop and implement efficient production/Lean Manufacturing methods to improve Quality,
Productivity, Throughput/Ouput, Safety, Timeliness and other Key Performance Indicators
(KPIs)/Deliverables
• Manage a 10,000 sq. ft. state-of-the-art sheet metal fabrication shop including shear, punch presses,
laser, press brakes (bending machines), roller, and other supporting equipment; with a work force of ± 50 operators
• Lead, mentor and develop a team of shop floor operators, supervisors and leaders, to enable them to
perform more effectively in their respective job functions
• Develop, implement and sustain preventive maintenance programs for all sheet metal processing
equipment, to maximize machine uptime and quality
• Manage punch and press brake (bending machine) tooling from acquisition, utilization, maintenance
to retirement
• Work cross functionally (Purchasing, Materials, Planning, Management, Human Resources, Quality,
Engineering, etc.) and across departments (Welding, Powder Coating, Assembly, Warehouse, etc.) to
accomplish all Department and Company/Business Goals
• Other responsibilities and projects as assigned
• Key Performance Indicators:
1) Quality
2) Cost
3) Productivity
4) Capacity Utilization
5) Machine Downtime/Utilization
6) Timeliness
7) Safety
Requirements:
• Bachelor degree in Mechanical Engineering
• At least 5 years of production experience with 2+ years supervisory experience
• Prior experience with sheet metal fabrication
• High degree of mechanical aptitude
• Production/Process/Operations-oriented, systematic, energetic
• Proven leadership and managerial skills
• Experience with Lean Manufacturing/Toyota Production System a strong plus
• Willing to work long hours if needed
• Able to work in a cross functional team environment
• Able to work under pressure and tight deadlines
• Excellent communication in English (written and spoken) is a must
• Able to work in Lobam, Bintan, Kepulauan Riau
7. Senior Quality Control Engineer (SMT/PCBA/Electronics)
Responsibilities:
• Problem discovery from ESCO IQC, In-Process QC, Final QA and Technical Service Feedback
• Initiates, plans and executes proactive technical audits for ESCO critical electronics vendors
• Further problem discovery during vendor factory technical audits
• Carry out root cause investigations with vendor
• Work with vendor to develop corrective action plans
• Follow up on implementation
• Utilize findings from the above processes as input into ESCO IQC processes
• Recommend, monitor and trend quality metrics from Vendor QC, ESCO IQC, In-Process QC, Final QC, Technical Service to assess actual improvements.
• Develop, recommend and implement strategies to continuously improve quality / reduce cost / reduce
risk, working cross-functionally with all stakeholders. This may include input into component selection, reliability engineering (relates to HALT testing for ESCO new designed PCBAs), recommending sourcing an alternate vendors, and others.
• As required, train ESCO personnel across functions so they may function more effectively in their roles to achieve the above objectives.
Requirements:
• Degree in Mechanical / Manufacturing Engineering
• At least 3 years QA/QC experience working in manufacturing industry
• Familiar with Toyota Production System concepts
• Demonstrated Quality Control experience with knowledge of ISO 9001, SPC, and other QC tools
• Candidate must have SMT experience in an electronics/PCBA manufacturing environment
• Experience with IPC standards, AQL tables, PCBA DFM
• Able to develop, implement, and continuously improve/sustain IQC and other procedures/processes
• Experience with vendor/supplier technical audits
• Experience in capital equipment manufacturing environment will be an advantage
• Technical and detail oriented
• Proven leadership and managerial skills
• Overseas work experience will be an advantage
• Excellent communication skills in English in a cross-cultural environment
• A team player and able to build internal and external relationship
• Able to work in Lobam, Bintan, Kepulauan Riau
8. Technical Manager
Responsibilities:
1. Project Management for New Product Development (NPD)
- Mechanical / Systems Design
- Certification/Regulatory Compliance
- Accountable for Quality/Reliability/Results/Certification Achieved On Time/Budget/Schedule
2. Lead Engineer
- Regulatory Compliance
- Publication/Sign-Off of Technical Specifications
- Participation in Industry Associations As Required/Assigned
- Other Technical Duties As Assigned
- Be Trained, Gain and Maintain Industry Accreditation Status
- Development and Implementation of Test Protocols and Procedures
3. Technical Service
- 2nd Line of Support for Complex Cases
- Provide Input into Serviceability
- Training Support
- Development and Continuous Improvement of Training Materials, Complex Service Bulletins
- Review Manuals
4. Quality/Change Management/Continuous Improvement
- Form and Lead Cross Functional Teams
5. Working Cross Functionally/Across Disciplines to Facilitate the Above
- Always Strive to Improve Quality
- Always Strive to Build/Design In Quality
- Facilitate Culture Change on the Shop Floor
- Always Strive to Improve the Products/Innovation
- Work Cross Functionally with Product Management, Business Development, Etc.
- Work Cross Functionality with Sales/Service Engineers Located at Esco Subsidiaries Internationally
6. Growth Roles, Project Management for:
- Embedded Systems, Hardware and Software
- Electrical
- Manufacturing Engineering
- Electrical Regulatory Compliance
- Greater Accountability for Product Cost
7. Other Responsibilities as Assigned
Requirements:
• Bachelor degree in Mechanical or Electrical Engineering
• At least 5 years New Product Development (NPD) Project Management experience with 2+ years
supervisory experience
• Able to work cross functionally and across disciplines
• Excellent verbal and written English in a cross-cultural environment
• Detail oriented with excellent organizational skills.
• Able to manage a team to be accountable for Outcome/Quality/Cost/Schedule
• Proven leadership and managerial skills
• Able to work in Lobam, Bintan, Kepulauan Riau
9. Technical Service Engineer
Responsibilities:
• Manage the productivity of independent field service technicians by ensuring proper training in the
skills and knowledge to perform field diagnostics
• Interact with field personnel in the repair of Esco Products
• Investigate and report field product performance issues
• Increase product reliability through the creation of corrective action plans involving cross-functional
teams from Quality, Engineering, Purchasing, Product Management and the field organization
• Develop and distribute product information and service bulletins to the field
• Ensure that the organization follows all the guidelines and policies regarding service and installation
guidelines
• Assign internal service personnel to perform field response on critical installations and modify
department priorities when changes are necessary
Requirements:
• Bachelor in Electrical Engineering or related fields
• At least 5 years experience with 2+ years supervisory experience
• Previous experience managing field service personnel in a manufacturing environment of installed
products
• Demonstrated organization and interpersonal skills, including the ability to interface with all levels of
management and service providers
• Demonstrated customer-oriented attitude and successful customer service track record
• Able to Work Cross Functionally and Across Disciplines
• Ability to process information and analyze to make appropriate recommendations
• Excellent spoken and written English
• Able to work in Lobam, Bintan, Kepulauan Riau
10. Welding Engineer (ASME/PED Pressure Vessel Products)
Responsibilities:
• Interpretation of technical requirements of fabrication codes, standards, and customer specifications.
• Development of appropriate welding procedures, welder training, and monitoring of shop weld
application.
Requirements:
• Bachelors degree in Engineering or a Diploma with solid experience
• 5+ years of experience in welding engineering assignments related to the manufacture and welding
of pressure vessel ASME code/PED products
• Strong background in Robotics would be a PLUS
Supervisory experience and automatic welding procedures is a PLUS
• Excellent written and spoken English
• Able to work in a cross functional team environment
• Able to work under pressure and tight deadlines
• Able to work in Lobam, Bintan, Kepulauan Riau
What Is Unique About This Position?
• Be part of a greenfield project to manufacture biomedical autoclaves at the Esco Bintan, Indonesia
facility (first such manufacturing facility in Southeast Asia)
• New position created for an experienced candidate with immediate assumption of responsibility and
allocation of resources
• Develop from scratch, implement and “own” a pressure vessel manufacturing cell within the Esco
manufacturing facility
• A unique opportunity to implement new pressure vessel fabrication procedures, practices and
technologies, which would be more difficult in an established environment
• Lead the Esco pressure vessel manufacturing cell and Manufacturing Engineering function
• Get things done quickly and advance your Career - this position reports directly to Senior Management
11. Mechanical Design Engineer
Responsibilities:
• Deliver innovative mechanical designs, fabrication, and specification for production
• Create piece part and assembly level CAD 3D models, drawings and design specifications. Apply Six
Sigma design principles to ensure robustness and Design for Manufacturability
• Develop specific mechanical components / mechanisms to be integrated with final product
• Plan, schedule and manage mechanical project deliverables in a coordinated, multi-disciplinary
project team environment. Responsible for all mechanical aspects of each project from design
through to release to tooling and manufacturing
• Ensure the integrity of all mechanical design outputs, including documentation, revision control,
product regulatory testing and approvals, intellectual property opportunities, etc
• Coordinate with other functions outside of R&D including production, product management, outside
agencies, vendors, etc
• Perform or direct tasks in support of new product development efforts such as drafting, literature,
research, prototype fabrication, experiments, testing, etc. Assist in budget and resource forecasting
for departmental activities and technical projects
• Carry out performance optimization, cost analyses, prototyping, and design support for production
Requirements:
• Diploma / Bachelor degree in Mechanical Engineering, preferably specialized in Design
• At least 2-3 years of hands-on experience designing mechanical components and assemblies.
• Good knowledge with 2D/3D CAD/ CAM software, preferably Vertex and Solid work, ProEng, and AutoCAD
• Must be able to create parts, multi-component assemblies and dimensioned drawings to company
standards. Strong ability with geometric and dimensional tolerance analysis, tolerance stack-up and tolerance optimization.
• Strong background in materials, production fabrication techniques, computational fluid dynamics
(CFD), and processes including sheet metal processing, other background in injection molding, diecasting
and machining will be an advantage.
• Must have a strong interest in R&D
• Excellent written and verbal communication skills and demonstrated ability in documenting technical
work to make the complex simple.
• Emphasis will be placed on candidates who have demonstrated success in taking similar products
through the complete design cycle
• Good command of spoken and written English
• Fresh graduate are welcomed to apply
• Able to work in Lobam, Bintan, Kepulauan Riau
12. Senior Mechanical Design / Systems Engineer (NPI/NPD)
Responsibilities:
• Concept-to-completion development of electro-mechanical equipment/machinery products.
• Includes preparing costings, compiling system/performance design specifications, mechanical design
of parts, subassemblies and top-level assembly, sourcing/integrating off-the-shelf/custom
components/parts (blowers/motors/hardware/controls/filters/molded/extruded parts), prototyping,
testing/validation, documentation/training/handover.
• Participate in / follow the prototyping process, from sheet metal fabrication, to assembly and testing,
in order to identify areas for improvement, to strive to Design for Manufacturing / Assembly / Service.
• Vendor/supplier liaison for sourcing, vendor selection, qualification, first article inspection, and
continuous improvement, especially for custom molded/extruded parts.
• Clearly organize/structure the Product Structure Definition, to enable part/sub-assembly re-use,
design platform modularity, and project risk minimization.
• Development, maintenance and continuous improvement of Manufacturing Work Instructions and Process Sheets including Bending/Forming Drawings, Welding Instructions, Assembly Work
Instructions, Test Procedures and others.
• Drive from a “Systems-Perspective” the development of User/Operator and Service Manuals,
collating/compiling information from other functional Engineering specialities (Electrical, Embedded
Hardware, Software, Regulatory Approvals, etc.)
• New Product Introduction support including Shop Floor Training, Pilot Run, First Article Burn-
In/Inspection, Quarantine (As-Needed), Safe Launch.
• Technology transfer support for transfer of technology/knowledge from overseas facilities from
design, functional specifications, manufacturing line set up, processes, tooling, fixtures and other
related areas.
• Seasoned mechanical design engineer able to deliver quality projects/designs on time and within cost
budget.
• Independent, able to manage own project plan/budget/schedule.
• Team player, able to integrate with a cross-functional team (Electrical Engineering, Embedded
Systems Hardware and Software Engineering, Manufacturing Engineering, Regulatory Approvals,
Purchasing/Procurement, Manufacturing/Production, Quality Control, Product Management,
Technical Service, etc.), to deliver a validated, documented, quality electro-mechanical system on time and within budget.
• Review, approve and implement Engineering Change requests/Notifications/Orders.
Requirements:
• Degree in Mechanical Engineering, related field, or relevant industry experience.
• Some Systems Engineering experience.
• 3+ years of experience in designing equipment/machinery products.
• Sheet metal design experiences a plus.
• Familiar with New Product Development / NPD / NPI processes.
• Knowledge of 3D design software (SolidWorks, Pro/Engineer or SolidEdge) a must.
• Experience with PLM (Product Lifecycle Management) software such as Dassault Systems
ENOVIA/MatrixOne, PTC WindChill, Siemens TeamCenter would be a plus.
• Project management experience a must.
• Prepared to go the extra mile.
• Demonstrated organization skills to successfully meet and / or exceed product quality and cost
requirements.
• Effective verbal & written English communication skills across all levels and function within a multidisciplinary
product development environment.
• Able to work in Lobam, Bintan, Kepulauan Riau
13. Senior Refrigeration Design Engineer
Responsibilities:
• Analyze, design, develop, and enhance thermal control systems
• Conduct thermal analysis, mechanical calculations and network with developers/ engineers
• Report estimation of project cost
• Perform prototype design, evaluation, testing and integration
• Prepare and update results documentation, engineering drawings and operation procedures
• Assist and support manufacturing and production issues as well as provide consultation/improvement plan
• Perform or direct tasks in support of new product development efforts such as drafting, literature, research, prototype fabrication, experiments, testing, etc. Assist in budget and resource forecasting for departmental activities and technical projects
Requirements:
• Master in mechanical engineering specialized in Thermodynamics
• At least 3-5 years working experience in related fields
• Expert knowledge on Heat Transfer, Fluids Dynamic, Finite Element Analysis, Cooling and Ventilation
analysis, Pressure relief analysis, and Compressor selection preferred
• Knowledge of refrigeration theories and practices
• Familiar with actual production methods/ brazing methodology
• Excellent in written and spoken English
• Able to work cross culture, cross functionally, and across disciplines
• Knowledge of 3D design software (SolidWorks, Pro/Engineer or SolidEdge) a must.
• Must have a strong interest in R&D
• Able to work in Lobam, Bintan, Kepulauan Riau
14. Technical Writer
Responsibilities:
• Create/Update documentations to take into account new product versions
• Maintain and validate existing documentations (manuals, reference guides, user guides)
• Learn products well and translate technical details of products into simple, easy to understand
product literature for delivery to customers.
• Prepare brochures, user manuals, documentation; sell sheet, and press/product releases.
• Design and create product literature, edit, and layout; insert copy and standardize literature according
to company’s corporate image.
• Prepare rough drafts for review by staff or distributors before closing out the literature production process by sending it for print
Requirements:
• Degree in Engineering, Biology, or Chemistry preferred
• Excellent written and spoken English
• Experienced in writing engineering documents, e.g. User Requirements, Engineering Specifications,
Factory and Site Acceptance Test Protocols, Product Test Protocols, etc
• Experienced in writing validation documents e.g. Validation Plans, Risk Assessments.
• Strong knowledge in Microsoft Office, Adobe InDesign, Visio, etc
• Creative, fast learner, observant and resourceful
• Knowledge in laboratory and industrial procedure is a plus
• Able to work in Lobam, Bintan, Kepulauan Riau
15. Manufacturing Engineer
Responsibilities:
• Recommend and apply engineering methods and procedures to improve product quality to keep plant
operational, eliminate waste, reduce cycle time, and improve operating performance.
• Provide technical support to manufacturing departments through the collection and processing of
information relating to assigned projects, followed by evaluation of all information and alternatives
resulting in recommendations for a course of action to management, and subsequent implementation.
• Recommend and implement Manufacturing processes and procedures, tools and equipment, layouts
and methods to improve:
Flexibility
Energy Utilization
Set-up Time
Value Added Operations
Mfg. Cycle Time
Material Utilization
Quality
FDA GMP ISO-9000
Third Party Certification Program
Safety
Customer Satisfaction/Internal and External
• Develop machine/manpower requirements and utilization for long-range business plans.
• Review and recommend manpower utilization.
• Prepare appropriate manufacturing policies and procedures.
• Resolve production floor technical issues to achieve throughput and quality goals.
• Actively participate in new product development to optimize production productivity.
• Review and approve Engineering Change Requests (ECR’s).
• Work on Continuous Quality Improvement.
Requirements:
• Must have working knowledge of hard goods manufacturing processes and machinery, along with a
good analytical ability to analyze present procedures and make recommendations for improvement to
management.
• Must be able to resolve complex problems.
• Bachelors in related engineering field or equivalent work experience.
• Minimum two years working experience.
• Working knowledge of various sheet metal fabrication and welding procedures and practices would
be a plus.
• Must have excellent communication and interpersonal skills and be able to demonstrate same across
department boundaries and with all levels of management.
• Able to work in Lobam, Bintan, Kepulauan Riau
16. Human Resources Officer (HR)
Responsibilities:
• Assist the HR team in delivering full spectrum of Human Resources services
• Handle HR administration work, provide support and advise to employees as required
• Responsible for updating and maintaining the Employee HRM database and confidential personal files
• Plan, develop, manage and administer training programs for employees
• Assist in orientation and induction program for new employees
• Assist in payroll processes
Requirements:
• At least 1 year experience in HR, preferably in training
• Familiar with full spectrum of HR (training, recruitment, manpower regulations, etc)
• Good command in written and spoken English
• IT savvy and proficient in Microsoft Office applications
• Meticulous, organized with an eye for details
• Strong communication and interpersonal skills
• Pleasant and approachable personality with a positive learning attitude
• Able to work under pressure and tight deadlines
• Able to work in Lobam, Bintan, Kepulauan Riau
17. Accountant (Payroll)
Responsibilities:
• Handle full set of accounts; co-ordinate and ensure monthly closing with stipulated deadlines
• Manage and ensure compliance with all accounting, tax, statutory, legislative requirements and group policies
• Responsible for monthly payroll calculation including PPh 21, overtime, absenteeism, bonus, etc
• Responsible for updating employee status and handling claims related to Jamsostek
• Responsible for handling petty cash
• Any other duties assigned
Requirements:
• Bachelor degree in Accounting
• At least 2 years working experience in related fields
• Good knowledge in overall accounting system
• Able to work under pressure and tight deadlines
• Meticulous and attention to details
• Excellent numerical skill
• Good command in spoken and written English. Ability in Mandarin is a plus
• Computer literate, especially Excel
• Able to work in Lobam, Bintan, Kepulauan Riau
Interested candidates are invited to write in with a full resume, stating present/expected salaries, and enclosing a recent photograph to jobs@escoglobal.com
0 komentar
Posting Komentar